2000 sensitron semiconductor 221 west industry court deer park, ny 11729 - 468 1 phone (631) 586 - 7600 fax (631) 242 - 9798 www.sensitron.com sales@sensitron.com sensitron semiconductor technical data data sheet 902, rev. a hermetic power schottky rectifier low forward voltage drop description: a 45 volt, 120 amp, power schottky rectifier in a shd - 3/3 - a/3 - b package. maximum ratings all ratings are @ t c = 25 c unless otherwise specified. rating symbol max. units peak inverse voltage piv 45 volts maximum dc output current @ t c =100 o c i o 120 amps maximum nonrep etitive forward surge current (t = 8.3ms, sine) i fsm 1650 amps maximum junction capacitance (v r =5v) c t 4800 pf maximum thermal resistance (junction to cathode) r jc 0 .38 c/w maxi mum operating and storage temperature range top/tstg - 65 to + 150 c electrical characteristics characteristic symbol max. units maximum forward voltage drop, pulsed (i f = 120 amps) t j = 25 c t j = 125 c v f 0.60 0.57 volts maximum reverse current (i r @ 45 v piv) t j = 25 c t j = 125 c i r 9.0 420 ma shd114612 shd114612b
2000 sensitron semiconductor 221 west industry court deer park, ny 11729 - 468 1 phone (631) 586 - 7600 fax (631) 242 - 9798 www.sensitron.com sales@sensitron.com sensitron technical data data sheet 902, rev. a mechanical dimensions: in inches / mm shd114612 shd114612b shd - 3 shd - 3b 0.0 0.2 0.4 0.6 0.8 forward voltage drop - v f (v) 10 -1 10 0 10 1 10 2 instantaneous forward current - i f (a) typical forward characteristics 125 c 150 c 25 c 0 10 20 30 40 50 reverse voltage - v r (v) 10 -2 10 -1 10 0 10 1 10 2 10 3 instantaneous reverse current - i r (ma) typical reverse characteristics 25 c 50 c 75 c 100 c 125 c 150 c 0 10 20 30 40 50 reverse voltage - v r (v) 1000 1500 2000 2500 3000 3500 4000 4500 junction capacitance - c t (pf) typical junction capacitance .075 (1.91) max .410.010 (10.4.254) moly lid moly bas e .410.010 (10.4.254) alumina ring .090 (2.29) max alumina ring moly base (cathode) .060.010 (1.52.254) .015.002 (.381.051) .020.005 r (.508.127 ) .410.010 (10.4.254) .150.010 (3.8 1.254) .560.020 (14.2.508) .410.010 (10.4.254) .015.005 (.381.127) copper anode
2000 sensitron semiconductor 221 west industry court deer park, ny 11729 - 468 1 phone (631) 586 - 7600 fax (631) 242 - 9798 www.sensitron.com sales@sensitron.com sensitron technical data data sheet 902, rev. a disclaimer: 1 - the information given herein, including the specifications and dimensions, is subject to change without prior notice to impro ve product characteristics. before ordering, purchasers are advised to contact the sensitron semicon ductor sales department for the latest version of the datasheet(s). 2 - in cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safet y should be ensured by using semiconductor devices that feature assured safety or by means of users fail - safe precautions or other arrangement . 3 - in no event shall sensitron semiconductor be liable for any damages that may result from an accident or any other cause during operation of the users units according to the datasheet(s). sensitron semiconductor assumes no responsibility for any intellectual proper ty claims or any other problems that may result from applications of information, products or circ uits described in the datasheets. 4 - in no event shall sensitron semiconductor be liable for any failure in a semiconductor device or any secondary damage resulti ng from use at a value exceeding the absolute maximum rating. 5 - no license is granted by th e datasheet(s) under any patents or other rights of any third party or sensitron semiconductor. 6 - the datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of sensitron semiconductor. 7 - the products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their applicat ion will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchase rs or any third party. when exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulat ions. shd114612 shd114612b
|
